EdenPURE 1000 Gen 3
Quick Links
Product Information
  • 3 Year Manufacturers Warranty

  • Push Button Controls

  • Infrared Remote

  • Electronic Thermostat

  • The GEN 3 can be run on “Auto” mode; if the mode is set to "Auto" the unit will cycle on and off to maintain the desired temperature setting.  It is also equipped with a “HIGH” mode; if the mode is set to "High" the unit will stay on Full power at the highest heat setting and keep heating.  It will not cycle off on "High" mode.

  • When the GEN 3 is set on the “Auto” mode and cycling off and on, it has been equipped with an Energy Savings feature.  The unit will run on full power until it gets to within 2 degrees of the desired temperature.  At this point it will automatically go into an energy savings mode which shuts down 2 of the heating elements and lowers the fan speed.  Not only will this save energy, it also keeps the room temperature closer to the desired temperature.  If the room temperature should fall below 2 degrees the unit will return to the full power mode until the desired temperature is reached again.

  • Washable Filter

  • Modular design - galvanized steel inside / ABS copolymer cabinet

  • Caster Wheels

  • 6 Commercial Infrared Quartz Elements

  • 3 Solid Copper Heat Exchangers

  • Heats Up To 1000 Sq. Ft.

  • Rated at Approx. 5000 BTU

  • Approx. 26 lbs.

  • Height: 17" Width: 13" Depth 18 3/4"

  • Uses Conventional 110 Volt 3 Prong Grounded Outlet

  • Approx. 6' Long Electrical Cord, 14 Gauge

  • Amps: Full Power Mode = 12.5  -  Energy Savings Mode = 8.12

  • Watts: Full Power Mode = 1483  -  Energy Savings Mode = 947